Rimba Spreader Bar Set for Dildo

This spreader bar set has different purposes. Some may use this to place the dildo firmly on top, and others may use it to fasten feet firmly to each end of the spreader bar.

The set consists of 3 parts. A "foot", a middle piece and a top part to attach the dildo firmly. Assemble the 3 parts together, and you can fasten your partners feet firmly as well as mount the dildo on the top.

Mount the dildo by removing the top metal disk, fasten the dildo, and thereafter reinsert the disk. In that way the dildo sits firmly and is ready to use.

The idea behind the spreader bar is that the person restrained cannot be clamped if the dildo is not inserted.  So it is about setting the spreader bar at the optimum height. Max. height is approx. 30.5 inches.

Note! You need to purchase the dildo seperately for the spreader bar set. It needs to be a strap-on dildo with a flat or suction cup. For it to sit firmly, the foot/suction cup requires a minimum diamter of 2 inches.  

In addition, you are also required to purchase ankle cuffs seperately, if you would like the opportunity to fasten feet firmly to the spreader bar. These cuffs need to have snap hooks or the like to fasten feet to the spreader bar.