With this original Cloneboy Vibrator Make it Yourself Dildo set, you can create a dildo in a true copy of your own penis with a built-in vibrator!
The Cloneboy Vibrator set contains everything you need for this simple process: 1 vibrator, 1 casting tube, 2 packs of casting powder, a pack of hardener, a pack of silicone, a cock ring, a wooden stirring stick, plastic gloves and a user guide.
How to use a Cloneboy Vibrator set:1.Get your penis erect and keep it erect with the cock ring.2.Blend the casting powder with water.3.Place your penis in the casting tube and pour the gel in the form.4.Wait a couple minutes before pulling your penis out of the tube.5.Pour the silicone down in the form and place the vibrator in position.6.Allow the silicone to solidify. And there you have it, a true copy of your penis in the form of a dildo with a built-in vibrator.
The Cloneboy Vibrator is a perfect gift idea for birthdays, bachelorette parties or when you are about to take a long trip away from your partner. Produced from 100 % body friendly and medically tested materials.
Measurement of the Cloneboy casting tube: Diameter: 3 inches, length: 9 inches. Measurement of vibrator: Length: 5 inches. Diameter: 1 inch.
N.B.! Remember to follow the instructions from the user guide when it comes to time and temperature etc. for the best results.
Do you have a super straight and small tool? Then maybe this is the product for you
Jörgen - 29. dec. 2020
Do you have a small penis that is also completely straight?! Congratulations(?), then this might be for you! If you have a larger tool that has a small bend to it, you might as well forget it. Since my tool is a bit crooked, it isn’t possible to reduce the tube as the instructions say, because then the tool touches the outer edges of the tube. If you don’t reduce the diameter of the pipe and have a tool that is longer than average, then you won’t have enough molding material. I had no other choice but to throw the first try out and try again. In the second attempt, the supplied rubber which the tool is supposed to go through broke. Everything spilled out on the floor... Top notch!
0
Fun but not enough silicone
Him and her - 9. dec. 2020
It is a pity that there is not enough silicone to fill out the mould :-( Besides that, it was a fun project.
0
Hard to use
Cousin Blob - 10. jul. 2019
Incredibly hard to use if you are just one person. The casting mix solidifies very quickly which gives a very limited time to work with. I had to give up when there was a hole in the mould and all the silicone ran out next to it. You really have to plan the process and have everything ready if you are to have a chance of success.
0
Funny
Me - 1. jun. 2020
Great product.
A little difficult to get good results, but definitely fun.
Apart from the fact that it is difficult to stay hard when you get cold liquid on the penis, I had 2 problems with this.
It was not enough with 1 bag of mold forming agent, without making the pipe somewhat narrower (it was actually instructed that you should do it, but I think it seemed to be a little too tight for that. But had to give up and remove about 2 cm of the circumference of the pipe.
Luckily it came with 2 bags of casting.
The next problem was that there was not enough silicone to fill the entire mold, even with vibrators.
The instruction says that it should be filled up 3/4 full. But there was not enough silicone.
0
Good product.
Pala - 21. may. 2021
The product itself was of very high quality. There were quite a few blurs. :D The most brilliant idea was that the package contains the necessary ingredients in two models.first did a little messing around!!
0
Needs a more thorough instruction manual
Anonymous - 12. feb. 2021
It's a lot of fun to make! Needs more explanatory instructions, and in Danish
Machine translated from sinful.dk
Fun gift
Anonymous - 13. mar. 2024
I bought it for my friend, who I thought deserved to think of me more than she already does
Machine translated from sinful.dk
Easy to do
Anonymous - 13. mar. 2024
The two of us managed to do it very nicely, the curvature of my own penis caused some problems but the moulding was successful in the end! The edge of the vibrator stuck out a bit at one point, do you think this will cause problems? Tonight for the test!
Machine translated from sinful.fi
The end product very good
Anonymous - 13. mar. 2024
On a whim, I bought this product to make a copy for my wife. Found all the equipment needed (you should have plenty of time), started and got little man up, put on a penis ring, poured over the soup at 20 degrees and the little guy got quite a shock poor guy. Was also a little too small space so should not have cut the pipe in width as the manual said. Fortunately, it came with 2 packages of moulding. The first was only 12 cm long, should have been 17 cm, no wonder with the cold soup. I pulled myself together and got it up again after a hot shower, was quick to stuff it in the pipe and got all over the soup again. Managed to keep 15 cm in the cold. The finished product turned out really well! The bathroom looked like a metal lab with white powder, whisks, scissors ++ so there was a lot of cleaning.
Machine translated from sinful.no
Funny cloneboy
Anonymous - 13. mar. 2024
Cloneboy works great! It's good to have plenty of time to do it, and you have to expect a little spillage when moulding. But the result was better than expected, a little cold to pour on the moulding compound, but threw in a little blue pill and the result was 100% Recommended!
